NEWS

Check category
Homepage
/
News
/
Company News
/
Safety protection of vacuum food bags

Safety protection of vacuum food bags

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-01-19 15:45
  • Views:

(Summary description)After packaging the food, the vacuum food bag is generally affixed to the outside of the food. However, during storage, the vacuum food bag will be loose, that is, the vacuum bag is no longer affixed to the food, but is There are gaps between foods. It is not certain whether this is considered to be a bulging bag. If the vacuum food bag is completely bulged, it is a manifestation of the bulging bag. After the bag is bulged, the food can no longer be eaten, because the food will spoil after the bag is bulged. If there is only a slight slack in the vacuum food bag, firstly, the quality of the food will not be affected by the bag because of thermal expansion and contraction at low temperature. Another reason is that a small amount of air has entered, which will affect the food. Whether the food has reached the level of corruption can only be determined after opening the bag. After the vacuum food bag is expanded, the quality of the food must be checked for peculiar smell or spoilage, and spoiled food must not be eaten.

Safety protection of vacuum food bags

Safety protection of vacuum food bags

Safety protection of vacuum food bags

Safety protection of vacuum food bags

(Summary description)After packaging the food, the vacuum food bag is generally affixed to the outside of the food. However, during storage, the vacuum food bag will be loose, that is, the vacuum bag is no longer affixed to the food, but is There are gaps between foods. It is not certain whether this is considered to be a bulging bag. If the vacuum food bag is completely bulged, it is a manifestation of the bulging bag. After the bag is bulged, the food can no longer be eaten, because the food will spoil after the bag is bulged. If there is only a slight slack in the vacuum food bag, firstly, the quality of the food will not be affected by the bag because of thermal expansion and contraction at low temperature. Another reason is that a small amount of air has entered, which will affect the food. Whether the food has reached the level of corruption can only be determined after opening the bag. After the vacuum food bag is expanded, the quality of the food must be checked for peculiar smell or spoilage, and spoiled food must not be eaten.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-01-19 15:45
  • Views:
Information

After packaging the food, the vacuum food bag is generally affixed to the outside of the food. However, during storage, the vacuum food bag will be loose, that is, the vacuum bag is no longer affixed to the food, but is There are gaps between foods. It is not certain whether this is considered to be a bulging bag. If the vacuum food bag is completely bulged, it is a manifestation of the bulging bag. After the bag is bulged, the food can no longer be eaten, because the food will spoil after the bag is bulged. If there is only a slight slack in the vacuum food bag, firstly, the quality of the food will not be affected by the bag because of thermal expansion and contraction at low temperature. Another reason is that a small amount of air has entered, which will affect the food. Whether the food has reached the level of corruption can only be determined after opening the bag. After the vacuum food bag is expanded, the quality of the food must be checked for peculiar smell or spoilage, and spoiled food must not be eaten.

Previous: How to solve the problem of over-hardening in the production of plastic bags
Next: The difference between PE plastic bag and PP plastic bag PO plastic bag
Previous: How to solve the problem of over-hardening in the production of plastic bags
Next: The difference between PE plastic bag and PP plastic bag PO plastic bag

More information

Environmental temperature and humidity control requirements in the workshop of packaging manufacturers [ 2021-01-19 ]
Due to the moisture absorption of nylon film and the series of adverse consequences caused by moisture absorption, there are certain requirements for the environment of paper-plastic packaging manufacturers. Generally, it should be stored at about 23°C, ±3°C, and the dry humidity difference is ideal within the range of 60%RH±5%RH. The nylon membrane cannot be placed directly on the floor or in the open air to avoid moisture absorption. The difference between dry and wet in the production environment generally does not exceed 75% RH. If it reaches 80% RH, production should be stopped (especially compound production) to avoid bad causes. If the task must be put into production, exhaust fans and dehumidifiers can be added to the production site to enhance indoor air circulation and reduce the humidity of the production environment to below 70%RH for reproduction. In short, when the humidity exceeds 70%RH, you must use it with caution. When the temperature is low or the humidity is too high, you must turn on the preheating equipment of the printing and laminating machine, first preheat the nylon film, and dry it on the surface of the nylon film. In order to facilitate the smooth progress of printing and composite production; at the turn of winter and spring, due to large temperature changes, when using mixed solvents, pay attention to effective adjustments with changes in temperature to prevent solvents from evaporating too fast or residual solvents. More quality accidents.
Detailed explanation of PE materials commonly used in food packaging [ 2021-01-19 ]
In addition to containing and sealing the product, a packaging bag is more important to isolate the product from the outside world to protect the product. In addition, the molecular interaction between the packaging material itself and the product causes the product to deteriorate, which has become a problem that the packaging bag manufacturer needs to solve. This article focuses on explaining how we solved this problem. Packaging bag manufacturers generally use PE material film in direct contact with the product. So, what is a PE material film?
How to solve the problem of over-hardening in the production of plastic bags [ 2021-01-19 ]
Plastic packaging bag manufacturers tell us that we need to pay more attention to the later stage of manufacturing products, because the product will over-harden if you are not careful. This phenomenon occurs because the proportion of ingredients has not been properly handled. Today we will understand how to prevent it. The appearance of hardening.
Ways to solve the wrinkle of vacuum packaging bags [ 2021-01-19 ]
Will the vacuum food packaging bag wrinkle? How to solve it? 1. Replace the qualified film. 2. Adjust the position of the film so that it does not deflect during the conveying process. 3. Adjust the amount of glue applied and apply glue evenly. 4. Adjust the process parameters to make the adhesive fully dry and reduce the residual amount of solvent. 5. The composite film should be fully cooled before rewinding. 6. Adjust compound pressure. 7. Adjust the tension of unwinding and rewinding to match the tension of each part. 8. Adjust the parallelism of each guide roller. 9. Clean the surface of each guide roller and replace the damaged guide roller to ensure that the surface of the guide roller is flat, smooth and clean.
The characteristics of different layers of plastic packaging bags [ 2021-01-19 ]
Among the applied materials of plastic packaging bags, there are often three-layer, five-layer, seven-layer, and nine-layer composite films. What is the difference between different layers of composite film? 5 layer and 3 layer comparison
Taobao

www.taobao.com

www.jd.com

www.pinduoduo.com

Copyright© 2021  Sichuang Starplastics Company Limited  All rights reserved   蜀ICP备2021006030号    Powered by www.300.cn

Search
Submit
Cancel

Copyright© 2021  Sichuang Starplastics Company Limited

蜀ICP备2021006030号    Powered by www.300.cn